How do you use the rupor-resize to resize the PRS-T1 1.0.5?
After extraction, I plugged in PRS-T1 (rooted with rupor-minimal), enabled Data Transfer mode, loaded the flash-reader.bat, and pressed Y
But after restart, the Internal memory is still 37mB.
What is wrong?
EDIT:
I checked the script log:
file source
http://translate.google.com/translat...scRuuYM3NUV3Kw
After extraction, I plugged in PRS-T1 (rooted with rupor-minimal), enabled Data Transfer mode, loaded the flash-reader.bat, and pressed Y
But after restart, the Internal memory is still 37mB.
What is wrong?
EDIT:
I checked the script log:
Quote:
|
Starting /etc/rc.d/rcS ERROR: Device has wrong partitioning, exiting immediatly 42c484ca61013db84db6213f7d9f7e2a Model: MMC SEM02G (sd/mmc) Disk /dev/mmcblk2: 1959MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 26.2MB 36.7MB 10.5MB primary ext3 2 36.7MB 47.2MB 10.5MB primary 3 47.2MB 783MB 735MB extended 5 47.2MB 64.0MB 16.8MB logical 6 64.0MB 207MB 143MB logical ext2 7 207MB 217MB 10.5MB logical fat16 8 217MB 259MB 42.0MB logical ext2 9 259MB 648MB 389MB logical ext4 10 648MB 783MB 134MB logical ext2 4 783MB 1959MB 1176MB primary fat32 Model: MMC SEM02G (sd/mmc) Disk /dev/mmcblk2: 3825664s Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 51200s 71679s 20480s primary ext3 2 71680s 92159s 20480s primary 3 92160s 1528511s 1436352s extended 5 92176s 124991s 32816s logical 6 125008s 403583s 278576s logical ext2 7 403600s 424127s 20528s logical fat16 8 424144s 506111s 81968s logical ext2 9 506128s 1266255s 760128s logical ext4 10 1266304s 1528495s 262192s logical ext2 4 1528512s 3825663s 2297152s primary fat32 Done /etc/rc.d/rcS |
http://translate.google.com/translat...scRuuYM3NUV3Kw