PRS-T1 PRS-T1 won't start, blinking light

Hello!, I've read a bunch of threads and tried to fix this problem in different ways with no success.
My PRS-T1 shows the "opening book" message (the progress bar is empty), the power light keeps blinkind, nothing else happens.

1_ I tried the sdcard-rescue.zip[1], the "opening book" progress bar loads, the reader keeps reading the sd card. I reseted my device after a few hours, it did not fix the problem. Also, tried to repeat the process, still no success.
I'm afraid my firmware version is v1.0.0 (I've never upgrade it), so that's probably why it didnt worked.

2_ I booted the device on recovery mode[2], thanks to "rupor-rescue"[3].
2a_ I run e2fsck, it found 0 bad sectors.
2b_ I did the Factory Reset, still no luck.

3_ I also tried the restore-set.0.zip[1], It may have shown "updating", I dont remember, but it did not solve the problem.

I've no backups to restore.

Is my device dead? or there is hope?


[1] http://projects.mobileread.com/reade...lash_packages/
[2] http://wiki.mobileread.com/wiki/PRST...covery_Console
[3] http://projects.mobileread.com/reade...upor-rescue.7z