Hi There,
I've been looking over these forums for over a week now, I've tried a lot of things but my ereader keeps on saying opening book... and nothing happens. There is a yellow light blinking.
The ereader is able to get into recovery mode and it's accessible via serial com port.
I've tried to look at the partitions and see if it's broken with e2fs but all seems in order. no Bad blocks or anything.
df output is:
I've tried backing up using roadkills disk image app but this fails at 0,25%
I've been able to use the Boroda restore-set-1.0.05.1130-us .It failed making a backup when i used the flash_reader.bat. when I place the folder OS Firmware on the sd card.
I do get a message telling me it's updating, and afterwards that I need to reset. But then the above mentioned state is the same again.
The log of the update shows:
I don't think it's right that some images aren't found. Can anybody help me with this problem?
Kind regards
I've been looking over these forums for over a week now, I've tried a lot of things but my ereader keeps on saying opening book... and nothing happens. There is a yellow light blinking.
The ereader is able to get into recovery mode and it's accessible via serial com port.
I've tried to look at the partitions and see if it's broken with e2fs but all seems in order. no Bad blocks or anything.
df output is:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 9719 3150 6569 32% /initrd
/dev/mmcblk0p1 7542344 25628 7516716 0% /initrd/mnt/sd
/dev/loop0 24785 20525 2980 87% /
tmpfs 124776 100 124676 0% /dev
shm 124776 0 124776 0% /dev/shm
rwfs 16384 404 15980 2% /mnt/rwfs
rwfs 16384 404 15980 2% /tmp
rwfs 16384 404 15980 2% /var
rwfs 16384 404 15980 2% /etcI've been able to use the Boroda restore-set-1.0.05.1130-us .It failed making a backup when i used the flash_reader.bat. when I place the folder OS Firmware on the sd card.
I do get a message telling me it's updating, and afterwards that I need to reset. But then the above mentioned state is the same again.
The log of the update shows:
Code:
Starting /etc/rc.d/rcS
/initrd/mnt/sd/OS Firmware/files/new.mmcblk2p9.img: Checksum 69d83ba82e2b3cf8490530934b0ff79e correct
Saving mmcblk2p9
49176+0 records in
49176+0 records out
Flashing mmcblk2p9
49176+0 records in
49176+0 records out
Flashing mmcblk2p9 complete 0
/initrd/mnt/sd/OS Firmware/files/new.mmcblk2p10.img: Checksum aaff45607e5fb7ea27d176eb8bf44cfb correct
Saving mmcblk2p10
131096+0 records in
131096+0 records out
Flashing mmcblk2p10
102169+0 records in
102169+0 records out
Flashing mmcblk2p10 complete 0
Image mmcblk2p1 not found
Image mmcblk2p2 not found
Flashing /initrd/mnt/sd/OS Firmware/files/new.ramdisk.uimg
419+1 records in
419+1 records outKind regards