Hello,
I wanted to root my PRS-T1 to Android because the default reader does not properly display formulas and math notations which I need most. I did two stupid mistakes: first I installed a rupor image for an earlier version of the firmware and the reader won't start anymore but I could get into recovery mode and I tried the rescue SD card but it didn't work. I tried to copy an image using win32imagewriter to the settings partition and after this the ereader is nothing but a piece of plastic. It responds to nothing, it's not detected by windows disk management or device manager. LED won't light when connected to computer USB port and windows won't show any sign that a new device is inserted. The one and only thing it does is that the red LED lights up if I connect it to wall charger. Soft resetting doesn't work. Hard resetting is not possible because the screen is frozen on the "opening book..." and won't change it no matter what...
The file I wrote to the settings partition through win32imagewriter is "C:\Users\go\Downloads\PRST1_SETTING partition\sdb7_SETTING.bin", I got it from the backup/restore thread somewhere but I have feeling it was the wrong file :(
Please help me solve this probelm, ideally I would like to have android on my ereader if possible. Otherwise I will be happy to have working like before.
Thank you in advance.
I wanted to root my PRS-T1 to Android because the default reader does not properly display formulas and math notations which I need most. I did two stupid mistakes: first I installed a rupor image for an earlier version of the firmware and the reader won't start anymore but I could get into recovery mode and I tried the rescue SD card but it didn't work. I tried to copy an image using win32imagewriter to the settings partition and after this the ereader is nothing but a piece of plastic. It responds to nothing, it's not detected by windows disk management or device manager. LED won't light when connected to computer USB port and windows won't show any sign that a new device is inserted. The one and only thing it does is that the red LED lights up if I connect it to wall charger. Soft resetting doesn't work. Hard resetting is not possible because the screen is frozen on the "opening book..." and won't change it no matter what...
The file I wrote to the settings partition through win32imagewriter is "C:\Users\go\Downloads\PRST1_SETTING partition\sdb7_SETTING.bin", I got it from the backup/restore thread somewhere but I have feeling it was the wrong file :(
Please help me solve this probelm, ideally I would like to have android on my ereader if possible. Otherwise I will be happy to have working like before.
Thank you in advance.