I bought the last weekend an used T2 from the local flea market.
It worked almost as new, except that one could not access some submenus in the settings nor other subpages in various device's own menus.
I looked into google and the only solution that worked (the others were simply misleading, to say it politically neutral :) ) was found in this forum - namely I was looking for a hard reset.
After a hard reset, I managed to get it in a full working state. I noticed the fact that it was "updated" to kobo bookshop, and it appears that this was the cause for its malfunction.
I decided to post this here, just in case, as I noticed there were a few threads about bricking Sony PRS series after updating to the last FW (kobo). I do not exclude that there might be other issues some FW may cause that cannot be cured this way, but I suggest people should hard reset it first then go other methods...
Hope it helps!
------------------------------------------------------------------
PS: With the Reader powered on, on the bottom of the device, press and hold the Power button until the Device Shutdown screen appears.
In the Device Shutdown screen, press Yes.
Press the Power button again to turn the Reader on.
While the screen displays opening book..... , simultaneously press and hold down the Page Turn (Next) and Back buttons.
Allow the Home screen to fully load (Loading... should no longer flash in the top left corner of your screen) and then do the following button sequence while still holding down the Page Turn (Next) and Back buttons:
Release - Press - Release the Back button only and then Release the Page Turn (Next) button.
In the Would you like to execute Factory Initialize screen, press Yes.
Press the Power button again to turn on the Reader. The Reader will be set to factory settings.
Source: https://www.mobileread.com/forums/sh...d.php?t=206747
It worked almost as new, except that one could not access some submenus in the settings nor other subpages in various device's own menus.
I looked into google and the only solution that worked (the others were simply misleading, to say it politically neutral :) ) was found in this forum - namely I was looking for a hard reset.
After a hard reset, I managed to get it in a full working state. I noticed the fact that it was "updated" to kobo bookshop, and it appears that this was the cause for its malfunction.
I decided to post this here, just in case, as I noticed there were a few threads about bricking Sony PRS series after updating to the last FW (kobo). I do not exclude that there might be other issues some FW may cause that cannot be cured this way, but I suggest people should hard reset it first then go other methods...
Hope it helps!
------------------------------------------------------------------
PS: With the Reader powered on, on the bottom of the device, press and hold the Power button until the Device Shutdown screen appears.
In the Device Shutdown screen, press Yes.
Press the Power button again to turn the Reader on.
While the screen displays opening book..... , simultaneously press and hold down the Page Turn (Next) and Back buttons.
Allow the Home screen to fully load (Loading... should no longer flash in the top left corner of your screen) and then do the following button sequence while still holding down the Page Turn (Next) and Back buttons:
Release - Press - Release the Back button only and then Release the Page Turn (Next) button.
In the Would you like to execute Factory Initialize screen, press Yes.
Press the Power button again to turn on the Reader. The Reader will be set to factory settings.
Source: https://www.mobileread.com/forums/sh...d.php?t=206747